Polyimide Kapton Sublimation Tape

Application Guidelines:

1. Substrate surfaces should be clean and dry prior to tape application.
2. Apply the tape to one substrate at a modest angle with the use of a squeegee, rubber roller, or finger pressure to help reduce the potential for air entrapment under the tape during its application.
3. Assemble the part by applying compression to the substrates to ensure good bonding of the substrate surfaces with the tape. Proper application of pressure (amount of pressure, time applied, temperature applied) will depend upon the design of the parts.

Storage Conditions: Store in a clean, dry and shady place. Storage temperature of 73°F and relative humidity of less than 60% are recommended.
Notice: All physical properties, statements, and recommendations are based either on tests we believe to be reliable or our experience, but they are not guaranteed. Naikos recommends each user determine the suitability of the product for the intended purpose.