Vinyl Ester UV-Cure Grain Sealer

Vinyl Ester UV-Cure Grain Sealer Solarez Vinyl Ester Epoxy UV Grain Sealer is perfect for sealing difficult substrates like oily woods, phenolic and bare metals. It cures in less than 5 minutes with exposure to good sunlight. This vinyl ester epoxy sealer is specifically formulated for tough-to-adhere surfaces such as phenolic, bare metals and oily woods like cocobolo, rosewood and purple-heart. Vinyl Ester is compatible with a multitude of finishes such as polyesters, urethanes, acrylates, and epoxies. Reactive finishes (high-solids) cure by chemical reaction and require fewer coats to fill open grain woods. They experience less shrinkage than solvent-borne or water-borne “evaporatives” – those that cure by drying. Shellac is often used to seal oily woods but can take an extensive amount of time to fill deep grain. Solarez UV-cure grain filler and sealer cures not by evaporation but by photochemical reaction, and does so in seconds to minutes, rather than hours or days.

• Perfect on difficult surfaces like oily woods or bare metals and cures in under 5 minutes.
• Easy to use and can be applied with a brush or roller.
• Cleans up with acetone or Solarez Eco-Friendly Solvent http://45.56.83.135/product/eco-friendly-clean-up-solvent/
• NO WAITING! Cures 100% Dry in 3-5 minutes with exposure to natural sunlight
• Amazing cure response and perfect sanding results
• Durable Hard Finish and Superior Scratch Resistance
• Eco-Friendly Low VOC FREE formula!
• Made in the USA!